Black Leaf Lotus Grinder with ceramic coating
Cleaning muffle? Then this 4-piece Black Leaf® Grinder with lotus effect is the right choice! The herb crusher made of the best aerospace aluminum is completely sealed with a layer of non-stick ceramic.
Dadurch bleiben Verschmutzungen nicht kleben, sondern perlen quasi ab. Somit könnte man auch sagen, dass der ‘Lotus’ selbstreinigend ist. Da unsere Kräuter und Gewürze oft ziemlich klebrig sind, bleibt natürlich doch mal etwas haften – doch diese kleinen Verunreinigungen lassen sich schnell mit heißem Wasser abspülen. Der ‘Lotus’ erstrahlt wieder im neuen Glanz!
But the grinder also has a lot to offer in other respects: Strong trapezoidal teeth that reliably grind herbs and harder things. A fine-mesh sieve made of stainless steel, through which valuable pollen is sieved into the beautifully rounded collection chamber. Then there are grip grooves on the lid for a better feel. Also, a nylon ring to prevent metal-on-metal friction. The herb grinder is milled and manufactured to such a high quality that turning it back and forth is very easy by hand.
In addition, the sieve part can also be omitted, converting the grinder into a 3-piece grinder that fits better in your jacket pocket. A strong magnet ensures perfect cohesion.
Attention: There may be deviations in the diameter of the mills by up to 1mm.
Here are a few more reasons why our ceramic coated grinder is better than a conventional grinder:
The special ceramic coating ensures that the remains of the ground coffee do not stick to the blades of your grinder, as is the case with conventional grinders.
The ceramic coating fills every single tiny crack (invisible to your eyes) on the aluminium surface where residue would normally stick and clog. This also results in almost no friction during use and delivers incredible results.
In our manufacture, we only use the highest quality anodised aluminium, which is coated with our food-safe, non-stick ceramic coating.
For this particular grinder, we use a stainless steel pollen filter to ensure durability and the grain size is also perfectly chosen.
Care and maintenance
Cleaning the cutting area: While the NV Grinder generally does not need to be cleaned, herbs that have an exceptionally high moisture content can easily stick. This is how you remove material that accumulates:
- Tap the mill lightly on a firm surface.
- Brush out anything left over with a toothbrush or other soft brush.
Exterior cleaning:
This grinder model is even washable. and will look like new after this process - no more toxic chemicals needed to ensure perfect cleaning! The cleaning brush included delivers impressive results even without water thanks to the ceramic surface.
Lubrication: Your NV Grinder is fully coated with low-friction non-stick ceramic and will not get stuck during normal use. However, if herbs are exceptionally moist, there may be slight deposits around the teeth. These can usually be brushed off using the techniques above. But if nothing else works, use refined hemp seed oil. This lubricates the grinder and makes it easy to remove deposits with a paper towel or cloth.
Use of solvents: The ceramic is very durable and it is safe to use alcohol or acetone on the coating without damaging it. However, harsh solvents can change the colour of the logo. Therefore, be careful!
!!! NEVER USE A METAL TOOL TO CLEAN THE GRINDER !!!!
With sufficient force, it is possible to remove the coating. While the coating is non-toxic and will not burn, scratches will affect the function of the grinder. Use a toothpick to remove particularly stubborn residue.
In Weed We Trust ? Smoking Paraphernalia since 1988: Bongs, pipes, vaporizers, grinders, dabbing accessories, paper & filters, lifestyle products. There are many innovative products of the brand that have also created one or the other world novelty. In the shop we offer the best selection of all products.
Reviews
There are no reviews yet.