NV Grinder with Logo 4-piece | Ø 64 mm
€39,90 €45,00 incl. VAT
| Manufacturer | NV Grinder |
| Material | Ceramic coated |
| Parts | 4-piece |
| Diameter | 64 mm |
| Features | Pollen sieve, ceramic coating |
NV Grinder
This is the first fully washable ceramic grinder on the market. Our ceramic grinder can be completely cleaned within 3 minutes and will look like new afterwards! The NV Grinder does not stick and (almost) never needs cleaning. This is due to the ceramic coating that coats every part of this grinder, from the lid to the cutting teeth to the pollen screen.
What colour do you want?
The standard size of the grinder measures 64mm in diameter. Available in six bright colours: White Widow, Light Purple, Black Domina, Yellow Stone, Baby Blue, Silver Haze.
What can the NV Grinder do?
- No sticking.
- First washable grinder on the market.
- Developed in Austria.
- Ceramic coating for hardly any friction.
- Convertible into a 3-piece grinder; simply remove the pollen filter and reassemble the grinder to make a smaller version of this grinder.
- Specially developed ceramic coating that is also used for cooking tools.
- Thin plastic ring for smooth grinding, no squeaking and little friction.
- Fine pollen filter.
- Razor blades sharp, diamond-shaped cutting teeth.
- Powerful magnets keep the lid firmly closed to prevent leftovers from falling out.
- Structured for better grip in the hands.
- Shipping from Austria.
Strong. Lightweight. Durable.
Every NV Grinder is made from aluminium. Thanks to exceptional strength, perfect balance and unparalleled durability, the NV Grinder will last a lifetime.
Unparalleled cutting technology.
With razor-sharp diamond teeth, even a velociraptor would be hard pressed to keep up with the shredding power of the NV Grider. A few turns are enough to shred even tough, stem-like herbs with ease.
Functional design.
Each NV Grinder has texturing at the top and bottom for a better grip.
Here are a few more reasons why our ceramic coated grinder is better than a conventional grinder:
The special ceramic coating ensures that the remains of the ground coffee do not stick to the blades of your grinder, as is the case with conventional grinders.
The ceramic coating fills every single tiny crack (invisible to your eyes) on the aluminium surface where residue would normally stick and clog. This also results in almost no friction during use and delivers incredible results.
In our manufacture, we only use the highest quality anodised aluminium, which is coated with our food-safe, non-stick ceramic coating.
For this particular grinder, we use a stainless steel pollen filter to ensure durability and the grain size is also perfectly chosen.
Care and maintenance
Cleaning the cutting area: While the NV Grinder generally does not need to be cleaned, herbs that have an exceptionally high moisture content can easily stick. This is how you remove material that accumulates:
- Tap the mill lightly on a firm surface.
- Brush out anything left over with a toothbrush or other soft brush.
Exterior cleaning:
This grinder model is even washable. and will look like new after this process - no more toxic chemicals needed to ensure perfect cleaning! The cleaning brush included delivers impressive results even without water thanks to the ceramic surface.
Lubrication: Your NV Grinder is fully coated with low-friction non-stick ceramic and will not get stuck during normal use. However, if herbs are exceptionally moist, there may be slight deposits around the teeth. These can usually be brushed off using the techniques above. But if nothing else works, use refined hemp seed oil. This lubricates the grinder and makes it easy to remove deposits with a paper towel or cloth.
Use of solvents: The ceramic is very durable and it is safe to use alcohol or acetone on the coating without damaging it. However, harsh solvents can change the colour of the logo. Therefore, be careful!
!!! NEVER USE A METAL TOOL TO CLEAN THE GRINDER !!!!
With sufficient force, it is possible to remove the coating. While the coating is non-toxic and will not burn, scratches will affect the function of the grinder. Use a toothpick to remove particularly stubborn residue.
About NV Grinder:
NVGRINDER is constantly working to achieve the best quality for its products.
We always have new ideas and work closely with the best manufacturers in the world.
Our quality standards are very high, no matter what the material, and our goal will always be to make the best and most innovative grinders for you!
What makes our products special?
Every type of grinder we produce goes through a testing process to ensure it meets a smoker's exacting needs before we officially release it.
| Manufacturer | |
|---|---|
| Colour | |
| Material | |
| Variants |
2 reviews for NV Grinder with logo 4-piece | Ø 64 mm
Add your review
Similar products
E. -
I would buy again at any time.
Have had it for over a year now and the thing just still doesn't stick!
Just brush it over once and everything is clean again - even though I smoke a lot!
I can only recommend it.
Stefan (Verified owner) -
So this was the most expensive and worst grinder I have ever bought... after 3 months already so stuck that you can no longer turn or open the upper part... every plastic grinder has been better... real sadness for this money.