SLX grinders lead the way
Wir sind stolz euch den Grinder vorzustellen der in der Industrie wegweisend ist. Produziert nach höchstem Maß, ist dieser Grinder wie kein anderer. Die unglaublich genau gefrästen Einzelteile ermöglichen einen noch nie dagewesenen Komfort beim Drehen. Der SLX Grinder verklebt nicht und muss (fast) nie gereinigt werden. Dies ist auf die einzigartige “Cerami-Coat-Formel” zurückzuführen, die jedes Teil dieses Mahlwerks, vom Deckel über die Schneidezähne bis hin zum Pollensieb, beschichtet.
SLX 2.5
The 2.5 version has been processed more precisely to guarantee minimal gap dimensions and to cause even less friction. The ceramic coating has also been updated and hardened.
What colour and size do you want?
The standard size of the grinder measures 62mm in diameter and 51mm for the smaller version. Recently, the XXL version with a diameter of 88 mm was added. Available in seven metallic colours: Charcoal Grey, Silver, Champagne Gold, Black, Yellow Gold, Leaf Green and Purple Haze.
What can the SLX Grinder do?
- No sticking
- No Teflon, PTFE or other carcinogenic chemicals
- Ceramic coating with extremely low friction
- Protects against water and oils
- The only grinder that never needs cleaning.
- SLX 2.5 is built to avoid friction as much as possible and to prevent the accumulation of dirt.
- Ceramic-Coat ensures smooth pleasure.
- SLX will convince you that it is the best grinder in the world.
- FDA certified
Strong. Lightweight. Durable.
Every SLX Grinder is made from 7075 aluminium, the alloy for precision applications - from high performance jet aircraft to Space-X rockets. With exceptional strength, perfect balance and unparalleled durability, your SLX Grinder will last a lifetime.
Manufactured with the highest precision.
Every piece of your SLX Grinder is made to the thousandth of an inch - for the perfection you deserve and we demand. The result? No more fumbling to connect the individual parts. No imperfections to hold you down and slow you down. Just smooth threads and easy turning.
Unparalleled cutting technology.
With 55 razor-sharp teeth in the standard size and 27 in the pocket size, even a velociraptor would be hard pressed to keep up with SLX's shredding power. A few turns are enough to shred even tough, stem-like herbs with ease.
Functional design.
Each SLX Grinder has cuts at the top and bottom for a better grip. This results in optimal handling.
Technical details:
The SLX version 2.5 is coated inside and out with SLX's own non-stick ceramic. Every contour, every tooth - even the pollen chamber. SLX grinders never stick and require no cleaning. The coating is bonded to the aluminium at a molecular level for durability. It is 100% non-toxic, FDA approved and does not release harmful chemicals.
Made of 7075 T6 aluminium to avoid cross-thread damage, bent and broken teeth or other damage. Most grinders are made from weaker 6 series aluminium. The 7 series is more expensive to manufacture but ensures your SLX herb grinder will last a lifetime.
SLX grinders have drum-tight stainless steel screens with a fine micron size. This ensures that only pollen is filtered and not pieces of herbs. What's more, they can be lifted out without threading!
Neodymium magnets ensure that your SLX Grinder won't pop open unexpectedly and that your herbs, moisture and odours stay safely inside.
Uniquely shaped teeth with 4 sharp cutting edges that provide a loose, even abrasion. In addition, they are thick and strong so they will not break or bend.
Two sizes available in 51 mm pocket size, 62 mm standard size or as 88 mm monster. Both models are 20% smaller than other standard models.
Care and maintenance
Cleaning the cutting area: While the SLX generally does not need cleaning, herbs that have an exceptionally high moisture content (more than 12%) can easily stick. This is how you remove material that accumulates:
- Tap the mill lightly on a firm surface.
- Brush out anything left over with a toothbrush or other soft brush.
Cleaning the outside: If dirt accumulates on the outside of your SLX Grinder, wipe it with a soft cloth with soap and water.
Lubrication: Your SLX is fully coated with low-friction non-stick ceramic and will not get stuck during normal use. However, if herbs are exceptionally moist, there may be slight deposits around the teeth. These can usually be brushed off using the techniques above. But if nothing else works, use refined hemp seed oil. This lubricates the grinder and makes it easy to remove deposits with a paper towel or cloth.
Use of solvents: The ceramic is very durable and it is safe to use alcohol or acetone on the coating without damaging it. However, harsh solvents can change the colour of the logo. Therefore, be careful!
!!! NEVER USE A METAL TOOL TO CLEAN THE GRINDER !!!!
With sufficient force, it is possible to remove the coating. While the coating is non-toxic and will not burn, scratches will affect the function of the grinder. Use a toothpick to remove particularly stubborn residue.
Note on grinding: Do not fill up the entire grinder. As long as the herb can move freely in the grinder, there is almost no abrasion on the walls or teeth.
Marco (Verified owner) -
SLX 2.0?
I thought about buying it for a long time but the price was too expensive, but my great wife gave me the SLX 2.0?
The first impression very stable, very heavy, good workmanship and the surface is really different from all other grinders, very smooth, it is usually enough to clean the grinder with a brush. If something should stick to the edge, simply remove it with a toothbrush or a cotton swab and, if necessary, with a little water. Can't say anything about the longer use but a lifetime warranty says a lot. I am really satisfied with the grinder, it does what it is supposed to do and the result is top?
Anonymity is right and important -
Als tipp für alle die das zukünftig lesen und den vorherigen bewerter: reinige deinen grinder einfach mithilfe von isopropanol, das lässt die Harz Rückstände quasi SOFORT “zerschmelzen”! Und 1L davon reicht bestimmt über ein jahr, nur nicht in der Apotheke danach suchen, brutal teuer, gibts auf Amazon für 10€
If you only have minor stains, simply soak a Q-tip with isopropanol and go over the resinous areas)
I usually wait until my grinders are very sticky. I put my grinders in a box and fill it with isopropyl alcohol so that everything is just about completely submerged in it
If you then also angle this container a little so that all the now greenish liquid collects on one side, if you try it out a little, you COULD make a small amount of hash yourself, of course you shouldn't because that would be illegal ZWINKER
Please do not forget that the stuff is really extremely flammable and the room is big enough in case something happens
Oh yes review, the grinder is great by the way, but due to the high price you have to be a very enthusiastic stoner, in the end it does the same thing as a 3€ acrylic grinder, if you don't want to smoke plastic just the 8,99€ alugrinder 😉
I hope this has made life easier for someone who also finds such activities annoying (isopropyl alcohol, isopropanol and all that stuff does the same thing, the important thing is that it evaporates completely. Theoretically, you could leave the hash for a few days after you have formed it into a sausage or ball so that everything has really evaporated, but I don't know how unhealthy that is. But it doesn't matter because that would be illegal
So don't try it out!!!