DLUX BHO extractor stainless steel | M

Dabbing is becoming increasingly popular, but unfortunately there are not yet many countries in the world today where the required concentrates such as oil or wax are readily available. With this extractor from 'Oil Black Leaf', ganjapreneurs can extract the finest oils and potent concentrates relatively quickly and easily from flowers and other plant material (e.g. leaf waste). This works with the D-Lux extractor using butane gas. However, we recommend the use of D.M.E. (dimethyl ether), as this is less explosive, non-toxic and far more efficient.

And this is how easy the extraction works, which may only be carried out outdoors or in very well ventilated rooms and away from all sources of heat:

Fill the extraction container loosely with well dried as well as chopped plant material and close it, a rubber ring provides the necessary seal. Put on the butane gas or D.M.E. can and let the solvent flow into the extractor. Soon the liquid extract begins to run out the other side, filtering through the replaceable sieve beforehand. It is best to collect it in a sufficiently large and temperature-resistant bowl, which ideally should also be non-stick. After about 24 hours, the precious, sticky concentrate can be scraped off.

With this type of extraction, the extraction container becomes extremely cold and normally requires the wearing of protective gloves. The 'Oil Black Leaf' extractor is therefore encased in a non-slip silicone sleeve that protects against freezer burn. However, for safety reasons, we strongly recommend that you wear protective goggles throughout the process! When the gas can is completely empty, the extractor should wait at least 30 seconds before removing it from the extractor again. For cleaning, first remove any remaining plant material from the extractor and then clean it, preferably in the dishwasher.

And don't forget: 7.10h - It's Dabbing Time!

Learn more about extracting here